Alcatel-Lucent OmniAccess 5740 - Page 71

Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
61
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Default Configuration
OmniAccess 5740 USG provides the following default configurations:
• If an IKE policy is not configured, you can attach ‘default’ IKE policy to the
crypto map. Following are the default values for the ‘default’ IKE policy:
i. Default proposal in IKE policy: md5-des
ii. Default PFS group in IKE policy: pfs group2
iii. Default IPSec security-association lifetime in seconds: 28800
iv. Default IKE lifetime in seconds: 86400
• Default authentication mechanism: Pre-shared Keys (PSK)
• If a transform set is not configured, the ‘default’ transform set is applied to the
crypto map. Following are the default values for transform-set:
i. esp-sha1-des
ii. esp-md5-des
• Following are the default values for a newly configured crypto map:
i. Default transform set in crypto map: ‘default’ transform set
ii. Default PFS group in crypto map: pfs group2.
iii. Default lifetime in seconds for a crypto map: 28800