Configure
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
71
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
iv. Enter the max failure value in Max Failure field.
Configure NaK packets (Number of LCP or NCP) without receiving a
Configure Ack before assuming that configuration is not converging. The
default value is 5 seconds.
• Click OK to save the PPP Timers configuration or click Cancel to cancel the
operation.
Step 8: After configuring the parameters, click Apply to configure MLPPP
interface or click Cancel to cancel the operation.
Step 9: The MLPPP interface thus added is displayed in the Interfaces page.
E
DIT MLPPP INTERFACE
Follow the procedure below to edit MLPPP interface configuration.
Step 1: On the Interfaces page, click Configure icon for the MLPPP interface to
be configured. Configuring MLPPP Bundle Interface page is displayed in the
Center Panel.
Step 2: The parameters configured for the MLPPP bundle interface is displayed
in their respective fields.
Step 3: Modify the required parameters. Bundle ID cannot be modified.
Step 4: Click Apply to save the configuration or click Cancel to cancel the
operation.
To Next Page
Loading...
Need help?
General
