Arris C4 - Diagnostics; Overview

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1022
Chapter 40
Diagnostics
 Overview ........................................................................................ 1022
 Problem Isolation ........................................................................... 1023
 Take Module Out-of-Service .......................................................... 1024
 Diagnosing Modules ....................................................................... 1025
 Diagnostic Logging .......................................................................... 1028
 Diagnostic Failure and Recovery .................................................... 1029
Overview
This chapter provides an overview of the module diagnostic procedures for the C4/c CMTS. Module diagnostics can be
used to determine if there is a problem with one of the modules.
Module diagnostics for the C4/c CMTS are accomplished by means of CLI commands described in this section. For more
information on these CLI commands see CLI Overview.