Arris C4 - Configure Route-Map Permit Match Ip Address Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2276
configure route-map * permit * match ip address prefix-list
Purpose
Selects a route based on the destination IP address.
Default Access Level
15
Command Syntax
configure route-map <word> permit [<int>] match ip address prefix-list <word>
configure route-map <word> permit [<int>] match ip address [prefix-list <word>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Sequence number
<word>
Regular expression to filter AS-path attributes.