Arris C4 - Display All System Channel Sets; Display Downstream Channel Sets

Chapter 14: Cable-side Configuration
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 419
Display All System Channel Sets
The following command example displays all system channel sets:
show cable channel-sets
An output similar to the following example will occur:
Cable
-mac chSetId DS/US Channel Set
----- ---------- ----- -----------------------------------------------
1 0x00000100 DS 14/0 14/1 14/2 14/3
1 0x00000100 US 1/0.0 1/1.0 1/2.0
2 0x00000101 DS 14/4 14/5 14/6 14/7
2 0x00000101 US 1/3.0 1/4.0 1/5.0
3 0x00000102 DS 14/8 14/9 14/10 14/11
3 0x00000102 US 1/6.0 1/7.0 1/8.0
4 0x00000103 DS 14/12 14/13 14/14 14/15
4 0x00000103 US 1/9.0 1/10.0 1/11.0
Display Downstream Channel Sets
The following command example displays all downstream channel sets:
show cable channel-sets ds
An output similar to the following example will occur:
Cable
-mac chSetId DS/US Channel Set
----- ---------- ----- -----------------------------------------------
1 0x00000100 DS 13/0 13/1 13/2 13/3
2 0x00000100 DS 12/0 12/1 12/2 12/3
3 0x00000100 DS 11/0 11/1 11/2 11/3
3 0x01000002 DS 11/0 11/1 11/2 11/3
4 0x00000100 DS 10/0 10/1 10/2 10/3
4 0x01000001 DS 10/0 10/1 10/2 10/3
5 0x00000100 DS 9/0 9/1 9/2 9/3
5 0x01000001 DS 9/0 9/1 9/2 9/3
6 0x00000100 DS 8/0 8/1 8/2 8/3
6 0x01000002 DS 8/0 8/1 8/2 8/3