Chapter 12: Basic Bring-up Procedure for a C4c CMTS
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 370
Verify Modem Registration
For status on a specific cable modem, enter the following command:
show cable modem detail <mac address>
An example of output for the show cable modem detail command for 0015.a4a4.573e:
C4# show cable modem detail 0015.a4a4.573e
15/0- 10/1.0 CM 0015.a4a4.573e (Arris) D3.0 State=Operational D1.1/tdma PrimSID=353
Cable-Mac= 1, mCMsg = 2 mDSsg = 1 mUSsg = 1 RCP_ID= 0x0010000004 RCC_Stat= 1
Timing Offset=1978 Rec Power= 0.00 dBmV Proto-Throttle=Normal dsPartialServMask=0x0000
Uptime= 0 days 0:06:29 IPv4=192.168.180.49 cfg=tput.bin noLoadBal=0x00
Privacy=Disabled
u/d SFID SID State Sched Tmin Tmax DFrms DBytes MFrms MBytes CRC HCS
u 705 353 Activ BE 0 0 47 3657 - - 0 0
dB 706 *353 Activ 0 0 - -
DSID: 0x0161 ChanSetId: 0x01000002 dsBondingMask: 0x000f
DCIDs Slot/Port
1 15/0
2 15/1
3 15/2
4 15/3
Current CPE=1 Max CPE=16
CPE 0003.471f.b386 IP=192.168.180.65 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
To display the status of the bonding group for a given MAC address, enter:
show cable bonding-group-status
An example of the show cable bonding-group-status output:
C4# show cable bonding-group-status
Cable mDSsg/
-mac chSetId mUSsg CfgId AttrMask
----- ---------- ------- ------- ----------
1 0x01000001 D1 1 0x80000000
1 0x01000002 D1 2 0x80000000
An example of the show cable rcc-status output:
C4# show cable rcc-status
To Next Page
Loading...
