Arris C4 - Configure Route-Map Match Ipv6 Address Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2268
configure route-map * match ipv6 address prefix-list
Purpose
Distributes any routes that have a destination network number address that is permitted by a standard access list, and extended
access list, or a prefix list, or to perform policy routing on packets.
Default Access Level
15
Command Syntax
configure route-map <word> match ipv6 address prefix-list <name>
configure route-map <word> match ipv6 address [prefix-list <name>] no
Supplemental
Information
To remove the entry, use the no option.
Parameters
<word>
Name of this route-map
<name>
Name of a specific prefix list.