Arris C4 - Configure Interface Tengigabitethernet Encapsulation Dot1 Q

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1961
configure interface tengigabitethernet * encapsulation dot1q
Purpose
Sets the encapsulation type for the specified interface to Q-tag, as defined by IEEE 802.1Q.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot/port>/.<0-254> encapsulation dot1q <int>
configure interface tengigabitethernet <slot/port>/.<0-254> encapsulation dot1q [<int>] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<slot>/<port>/<.0-
254>
RCM slot number/tengigabitEthernet port number/subinterface number.
Valid range for the C4 CMTS is <17-18>/<10>/.<0-254>
Valid range for the C4c CMTS is <17>/<10>/.<0-254>
<int>
Q-tag as defined by IEEE 802.1Q