Arris C4 - Configure Router Isis Lsp-Gen-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2461
configure router isis lsp-gen-interval
Purpose
Configures the generation rate of the LSPs.
Default Access Level
15
Command Syntax
configure router isis lsp-gen-interval [lsp-second-wait] <level-l | level-2>
configure router isis lsp-gen-interval [lsp-second-wait] <level-l | level-2> no
Supplemental
Information
To restore the default value, use the no option.
Parameters
[lsp-second-wait]
Milliseconds before initial LSP.
<level-1 | level-2>
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.