Arris C4 User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1821
configure interface gigabitethernet * isis ipv6 metric
Purpose
Changes the default metric for the interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis ipv6 metric <1-16777214> [level-1 |
level-2]
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis ipv6 metric [<1-16777214>] [level-1 |
level-2] no
Supplemental
Information
This command applies only when multi-topology has been selected using configure router isis address-family ipv6 multi-topology.
Use the no form of the command to return to the default metric.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<1-16777214>
Metric associated with the redistributed routes.
[<level1 | level2>]
Import as either level 1 or level 2 routes.
Related Commands
configure router isis address-family ipv6 multi-topology (page 2444)

Arris C4 Specifications

General

Brand	Arris
Model	C4
Category	Control Unit
Language	English