Arris C4 - Configure Interface Gigabitethernet Ipv6 Ospf Priority

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1809
configure interface gigabitethernet * ipv6 ospf priority
Purpose
Sets the router priority.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 ospf priority <0-255>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 ospf priority [<0-255>] no
Supplemental
Information
To reset to the default value, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<0-255>
Router priority.