Arris C4 - Configure Router Bgp Neighbor Enforce-First-As

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2407
configure router bgp * neighbor * enforce-first-as
Purpose
Configures the CMTS to require the neighbors to send their AS as the first AS number in their AS_SEQUENCE.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <ipv6> enforce-first-as
configure router bgp [<int>] neighbor <ipv6> enforce-first-as no
Supplemental
Information
To remove the restriction, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6>
IPv6 address