Arris C4 - Configure Privilege Exec Reset

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2235
configure privilege exec reset
Purpose
Resets the command privilege to the default values.
Default Access Level
15
Command Syntax
configure privilege exec reset <cmd>
Supplemental
Information
N/A
Parameters
<cmd>
The command or group of commands to be assigned a different level.
Related Commands
show privilege exec (page 3008)
configure privilege exec level (page 2234)