Arris C4 - Configure Router Bgp Neighbor Password

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2409
configure router bgp * neighbor * password
Purpose
Enables Message Digest 5 (MD5) authentication on TCP connections between BGP neighbors.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <ipv6> password <string>
configure router bgp [<int>] neighbor <ipv6> password [<string>] no
Supplemental
Information
To disable the password, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6>
IPv6 address
<string>
Specifies the case-sensitive BGP password. By default, none exists.