Arris C4 - Configure Interface Cable-Upstream Cable Mini-Slot-Size

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1709
configure interface cable-upstream * cable mini-slot-size
Purpose
Sets the size of the upstream mini-slot in ticks. Units are the number of 6.25 microsecond ticks.
Default Access Level
15
Command Syntax
configure interface cable-upstream <slot/ch[.0]> cable mini-slot-size <number of ticks>
Supplemental
Information
N/A
Parameters
<slot/ch[.0]>
The upstream slot/channel[.logical channel]. It will assume lc=0 if needed and not supplied.
<number ticks>
Number of 6.25 microsecond ticks. Use 0 or no to disable.
Channel width Number ticks in minislot
200 16 / 32 / 64 / 128
400 8 / 16 / 32 / 64 / 128
800 4 / 8 / 16 / 32 / 64 / 128
1600 2 / 4 / 8 / 16 / 32 / 64 / 128
3200 1 a / 2 / 4 / 8 / 16 / 32 / 64 / 128
6400 b 1 a / 2 / 4 / 8 / 16 / 32 / 64 / 128
Related Commands
show interface cable-upstream (page 2810)