Arris C4 - Show Cable Dsg Timer-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2644
show cable dsg timer-list
Purpose
Displays the provisioned timer-lists.
Default Access Level
1
Command Syntax
show cable dsg timer-list [timersetindex]
Supplemental
Information
If the user provides the timer set index, only those timer-list parameters belonging to that timerset index are displayed. If the
optional parameter is omitted, then all timer-list entries will be displayed.
Note: If a timer list is not associated with an interface, then the timer index will be preceded by a plus symbol (+). This is done to
assist in identifying provisioning disconnects.
Parameters
[timersetindex]
A decimal integer index corresponding to the specified timer-list to display.