Arris C4 - Configure Interface Link-Aggregate Isis Retransmit-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1931
configure interface link-aggregate * isis retransmit-interval
Purpose
Configures the maximum rate between LSP retransmits for the specified interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> isis retransmit-interval <seconds>
configure interface link-aggregate <0-9[.0-254]> isis retransmit-interval no
Supplemental
Information
This command is useful in very large networks with many LSPs and many interfaces to control LSP retransmission traffic. This
command controls the rate at which LSPs can be resent on the interface.
To restore the default value, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<seconds>
Minimum seconds before retransmitting. Valid range is 1 to 300.