Arris C4 - Configure Interface Link-Aggregate Ip Igmp Static-Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1854
configure interface link-aggregate * ip igmp static-group
Purpose
Statically adds membership to an IP multicast group on an IP virtual interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip igmp static-group <group> [source <domain-name |
source-ip>]
configure interface link-aggregate <0-9[.0-254]>ip igmp static-group <group> [source <domain-name |
source-ip>] no
Supplemental
Information
To remove membership to an IP multicast group on an IP virtual interface, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<group>
Multicast group IP address.
<domain-name>
Qualified domain name
<source-ip>
IPv4 address