Arris C4 - Сonfigure Interface Link-Aggregate Ip Rip Default-Metric

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1881
configure interface link-aggregate * ip rip default-metric
Purpose
Configures the RIP metric for the default route.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip rip default-metric <metric>
configure interface link-aggregate <0-9[.0-254]> ip rip default-metric [<metric>] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<metric>
Default metric is 0. Valid range is 0 to 15. If the default route metric is set to 0, the default route is not advertised.