Arris C4 - Show Ipv6 Route Isis

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2936
show ipv6 route * isis
Purpose
Displays the ISIS IPv6 route table entries.
Default Access Level
1
Command Syntax
show ipv6 route [vrf <name>] [include-inactive] [detail] isis
Supplemental
Information
N/A
Parameters
[vrf <name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[incl-inactive]
Includes all active and dynamic inactive routes. Does not display inactive static routes.
[detail]
Shows same routes in a non-abbreviated format.