Arris C4 - Show Cable Dsg Tunnel-Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2647
show cable dsg tunnel-group
Purpose
Displays DSG tunnel-group provisioning.
Default Access Level
15
Command Syntax
show cable dsg tunnel-group [0-4294967295]
Supplemental
Information
Note: The command may use the plus (+) and/or asterisk symbol (*) in the output to highlight provisioning misconnects and other
areas of concern. Any time one of these characters is displayed, a key is added at the bottom of the table.
Parameters
[0-4294967295]
The tunnel-group associated with the tunnel
Example
CMTS# show cable dsg tunnel-group
Tunnel GrpChl Vendor Rule Cable DS
Group Index Param Idx Pri -Mac Port
----------- ---------- ----------- ---- ----- ---------
11 1 *555 0 1 13/0/1
11 2 *5 0 1 13/0/2
12 1 1 1 1 13/0/1
20 1 - 0 1 13/0/2
20 2 - 0 1 13/0/4
100 1 *2 0 1 13/0/2
+4333 1 - 0 1 13/0/1
2147483702 1 - 0 1 13/0/1
* = The index provided has no associated provisioning.
+ = The tunnel group has no associated tunnels.