Arris C4 - Show Ip Ospf Database Opaque-As

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2867
show ip ospf database opaque-as
Purpose
Shows the OSPF Opaque AS link states.
Default Access Level
1
Command Syntax
show ip ospf [vrf <name>] database opaque-as [<a.b.c.d>] [adv-router <A.B.C.D>]
Supplemental
Information
N/A
Parameters
[vrf <vrf name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[<a.b.c.d>]
Link state ID (as an IP address).
[adv-router
[<a.b.c.d>]]
Advertising Router link states (as an IP address)