Arris C4 - Show Ip Interface Gigabitethernet

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2852
show ip interface * gigabitethernet
Purpose
Displays the gigabitethernet interface information for the client modules.
Default Access Level
Command Syntax
show ip interface [brief] gigabitethernet <slot>/<port>
Supplemental
Information
N/A
Parameters
[brief]
Displays the output in brief format
<slot>/<port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>