Arris C4 - Configure Route-Map Permit Match Ipv6 Next-Hop Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2280
configure route-map * permit * match ipv6 next-hop prefix-list
Purpose
Matches the next-hop address of the route.
Default Access Level
15
Command Syntax
configure route-map <word> permit [<int>] match ipv6 next-hop prefix-list <word>
configure route-map <word> permit [<int>] match ipv6 next-hop [prefix-list <word>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Sequence number
<word>
Prefix list number