Arris C4 - Configure Router Bgp Redistribute Ospf

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2425
configure router bgp * redistribute ospf
Purpose
Configures redistribution routes from OSPF routing processes into a Border Gateway Protocol (BGP) autonomous system.
Default Access Level
15
Command Syntax
configure router bgp [<int>] redistribute ospf [match <internal | external1 | external2>] [metric <int>]
[route-map <int>]
configure router bgp [<int>] redistribute ospf [match <internal | external1 | external2>] [metric <int>]
[route-map <int>] no
Supplemental
Information
Route maps are referenced by name.
To disable redistribution, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
[match <<internal |
external1 |
external2>]
The type of OSPF routes to redistribute into BGP.
[metric <int>]
Metric associated with redistributed routes
[route-map <int>]
Route-map used to modify BGP attributes of redistributed routes