Arris C4 - Configure L2 Vpn Cable-Mac

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2164
configure l2vpn cable-mac
Purpose
Configures all cable MAC interfaces participating in the L2VPN service.
Default Access Level
15
Command Syntax
configure l2vpn cable-mac {<mac_id> |all}
configure l2vpn cable-mac {<mac_id> |all} no
Supplemental
Information
CMs that attempt to register as L2VPN in non-participating cable-mac interfaces are rejected.
Note: Only designated cable MAC interfaces are able to host L2VPN CMs.
To remove the cable MAC interfaces participating in the L2VPN service, use the no version.
Parameters
<mac_id>
ID of the MAC interface. Range is 0 - 415.
all
All cable-mac interfaces.