Chapter 17: IP Packet Filters, Subscriber Management
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 564
configure cable filter group 4 index 2 src-mask 0.0.0.0
configure cable filter group 4 index 2 src-port 65536
configure cable filter group 4 index 2 dest-ip 0.0.0.0
configure cable filter group 4 index 2 dest-mask 0.0.0.0
configure cable filter group 4 index 2 dest-port 137
configure cable filter group 4 index 2 ip-proto 257
configure cable filter group 4 index 2 match-action drop
configure cable filter group 4 index 2 ip-tos 0x0 0x0
configure cable filter group 4 index 3 ip-version ipv4
configure cable filter group 4 index 3 src-ip 0.0.0.0
configure cable filter group 4 index 3 src-mask 0.0.0.0
configure cable filter group 4 index 3 src-port 65536
configure cable filter group 4 index 3 dest-ip 0.0.0.0
configure cable filter group 4 index 3 dest-mask 0.0.0.0
configure cable filter group 4 index 3 dest-port 138
configure cable filter group 4 index 3 ip-proto 257
configure cable filter group 4 index 3 match-action drop
configure cable filter group 4 index 3 ip-tos 0x0 0x0
configure cable filter group 4 index 4 ip-version ipv4
configure cable filter group 4 index 4 src-ip 0.0.0.0
configure cable filter group 4 index 4 src-mask 0.0.0.0
configure cable filter group 4 index 4 src-port 65536
configure cable filter group 4 index 4 dest-ip 0.0.0.0
configure cable filter group 4 index 4 dest-mask 0.0.0.0
configure cable filter group 4 index 4 dest-port 139
configure cable filter group 4 index 4 ip-proto 257
configure cable filter group 4 index 4 match-action drop
configure cable filter group 4 index 4 ip-tos 0x0 0x0
configure cable filter group 4 index 5 ip-version ipv4
configure cable filter group 4 index 5 src-ip 0.0.0.0
configure cable filter group 4 index 5 src-mask 0.0.0.0
configure cable filter group 4 index 5 src-port 65536
configure cable filter group 4 index 5 dest-ip 0.0.0.0
configure cable filter group 4 index 5 dest-mask 0.0.0.0
configure cable filter group 4 index 5 dest-port 445
configure cable filter group 4 index 5 ip-proto 257
configure cable filter group 4 index 5 match-action drop
configure cable filter group 4 index 5 ip-tos 0x0 0x0
Show Cable Filter Command
To display the configured information for all filter groups in the C4/c CMTS, use the following command:
show cable filter
An output similar to the following example will occur:
To Next Page
Loading...
