Arris C4 - Configure Interface Link-Aggregate Encapsulation Dot1 Q Priority

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1837
configure interface link-aggregate * encapsulation dot1q * priority
Purpose
Defines the 802.1p priority bits on the egress.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> encapsulation dot1q <int> priority [<int>] [iptos]
configure interface link-aggregate <0-9[.0-254]> encapsulation dot1q <int> priority [<int>] [iptos] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<int>
Q-tag as defined by IEEE 802.1Q
[<int>]
Fixed priority value
[iptos]
Maps IP TOS precedence to priority bits