Arris C4 - Show Ip Ssh Config

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2886
show ip ssh config
Purpose
Displays the settings for the bind address, port number, idle time, max clients, max shells, supported encryption and MAC
algorithms, service terminal, port forwarding, password allowed, password required, public key allowed, public key required, public
key first, and the max number of authentication failures.
Default Access Level
15
Command Syntax
show ip ssh config
Supplemental
Information
N/A