Arris C4 - Show Cable Dsg

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2640
show cable dsg
Purpose
This command shows all the interfaces that have DSG provisioning.
Default Access Level
1
Command Syntax
show cable dsg [verbose]
Supplemental
Information
The verbose mode will show detailed provisioning, while the normal mode will show the DSG indices provisioned against a given
interface.
Note: In both output formats, if the provisioning is not complete, an indication that the data is not complete will be displayed. In the
tabular format, an asterisk (*) preceding the value will indicate that the item has not yet been provisioned and a hyphen (-) will be
used for entries that contain no data.
Parameters
[verbose]
Using the optional parameter will display detailed provisioning.
Example
CMTS> show cable dsg timer-list
Timer Init Oper 2-way 1-way
List (tdsg1) (tsdg2) (tsdg3) (tdsg4)
----------- ------- ------- ------- -------
+1 2 150 10 150
+ = The timer-list is not associated with an interface.