Arris C4 - Configure Interface Tengigabitethernet Ipv6 Mtu

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2017
configure interface tengigabitethernet * ipv6 mtu
Purpose
Sets the maximum (MTU) size in bytes for IPv6 traffic on the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 mtu <1280-1500>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 mtu [<1280-1500>] no
Supplemental
Information
To restore the default setting, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<1280-1500>
Maximum size of a packet (in bytes) including the IP header.