Arris C4 - Configure Cable Metering Export

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1373
configure cable metering export
Purpose
Configures interim records with duplicate counter values for the IPDR streaming protocol feature.
Default Access Level
15
Command Syntax
configure cable metering export [all-counts] [cpe-info]
configure cable metering export [all-counts] [cpe-info] no
Supplemental
Information
Defaults disable all-counts and exclude CPE information.
To suppress interim records entries that have duplicate counter values, use the no option.
Parameters
[all-counts]
Export all interim records regardless of counter values.
[cpe-info]
Includes CPE information with the records. CPE information is a list of CPE IPv4 addresses.
Related Commands
show cable metering (page 2669)
configure cable metering (page 1369)
configure cable metering session-id * data-ack-timeout (page 1380)