Arris C4 - Configure Interface Gigabitethernet Ip Igmp Join-Group Source

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1743
configure interface gigabitethernet * ip igmp join-group * source
Purpose
Enables joining a multicast group locally.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp join-group <ip_addr> source
<ssm_addr>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp join-group <ip_addr> source
<ssm_addr> no
Supplemental
Information
To disable joining a local multicast group, use the no option.
Parameters
<slot></port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<ip_addr>
IP address
<ssm_addr>
SSM source IP address