Arris C4 - Configure Interface Gigabitethernet

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1727
configure interface gigabitethernet
Purpose
Allows you to enter the gigabitEthernet interface configuration mode for the specified interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>]>
Supplemental
Information
N/A
Parameters
<slot></port>[<.0-
254>]>
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]