Arris C4 - Show Crypto Ipsec Transform-Set

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2767
show crypto ipsec transform-set
Purpose
Displays the transform-sets.
Default Access Level
1
Command Syntax
show crypto ipsec transform-set [tag <trans-map-name>]
Supplemental
Information
If a transform-set name is given, this command will only show that transform-set entry.
Parameters
[tag <trans-map-
name>]
Name of the transform-set map.