Arris C4 - Configure Interface Tengigabitethernet Ip Rip Authentication Mode Text

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2003
configure interface tengigabitethernet * ip rip authentication mode text
Purpose
Configures the RIP authentication mode to clear text authentication
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip rip authentication mode text
configure interface tengigabitethernet <<slot>/<port>[.<0-254>] ip rip authentication mode text no
Supplemental
Information
By default, it is disabled on each interface.
To disable the authentication mode, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]