Arris C4 - MAC Domain Channel Association

Chapter 14: Cable-side Configuration
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 398
Table 58. MAC Domain Channel Association
Description
Command
This command serves as follows:
 Sets the downstream channel type.
 Associates a downstream channel
from a DCAM with a logical MAC
domain.
configure interface cable-downstream <slot>/<connector>/<dport>
[type <port_type>] [cable-mac <mac>]
Example commands:
configure interface cable-downstream 12/0/0 cable cable-mac 1
configure interface cable-downstream 12/0/1 cable cable-mac 1
configure interface cable-downstream 12/0/2 cable cable-mac 1
configure interface cable-downstream 12/0/3 cable cable-mac 1
configure interface cable-downstream 12/0/8 cable cable-mac 1
configure interface cable-downstream 12/0/9 cable cable-mac 1
configure interface cable-downstream 12/0/10 cable cable-mac 1
configure interface cable-downstream 12/0/11 cable cable-mac 1
configure interface cable-downstream 12/0/12 cable cable-mac 1
configure interface cable-downstream 12/0/13 cable cable-mac 1
configure interface cable-downstream 12/0/14 cable cable-mac 1
configure interface cable-downstream 12/0/15 cable cable-mac 1
Use the [no] option to remove a
downstream channel from a specific
cable-mac (MAC Domain).
Note: It will also be necessary to
shutdown the downstream channel first
before it can be removed from the MAC
domain.
configure interface cable-downstream <slot>/<connector>/<dport> no
Example command:
configure interface cable-downstream 12/0/0 no
This command associates an upstream
channel from a UCAM with a logical MAC
domain.
configure interface cable-upstream <slot>/<connector-group>/<uport>
cable cable-mac <mac>
Example commands:
configure interface cable-upstream 3/0/0 cable cable-mac 1
configure interface cable-upstream 3/0/1 cable cable-mac 1
configure interface cable-upstream 3/0/2 cable cable-mac 1
configure interface cable-upstream 3/0/3 cable cable-mac 1
configure interface cable-upstream 3/0/10 cable cable-mac 1
configure interface cable-upstream 3/0/11 cable cable-mac 1