Arris C4 - Configure Router Bgp Address-Family Ipv4 Neighbor Next-Hop-Self

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2344
configure router bgp * address-family ipv4 neighbor * next-hop-self
Purpose
Configures the router as the next hop for the specified neighbor.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv4 neighbor <a.b.c.d> next-hop-self
configure router bgp [<int>] address-family ipv4 neighbor <a.b.c.d> next-hop-self no
Supplemental
Information
To disable, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<a.b.c.d>
Neighbor IP address.