Arris C4 - Configure Router Rip Network

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2513
configure router rip * network
Purpose
Defines the interfaces on which RIP runs.
Default Access Level
15
Command Syntax
configure router rip [vrf <name>] network <ip-address>
configure router rip [vrf <name>] network <ip-address> no
Supplemental
Information
To delete the interfaces on which RIP runs, use the no option.
Parameters
[vrf <name>]
Name of the assigned VRF.
<ip-address>
IP address