Arris C4 User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1569
configure interface cable-mac * cable rcp-id * rcc * module * connected-module
Purpose
Configures the Receive Module to which this Receive Module connects.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable rcp-id <hex> rcc <int> module <int> connected-module <int>
configure interface cable-mac <mac> cable rcp-id <hex> rcc <int> module <int> connected-module <int> no
Supplemental
Information
To return to the default, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<hex>
Receive channel profile ID in hex (5 byte).
rcc <int>
Unique RCC ID for rcp-id defined earlier
module <int>
Receive Module to be connected. Valid number is 0-32
connected-module
<int>
Receive Module to be connected. Valid number is 0-32

Arris C4 Specifications

General

Brand	Arris
Model	C4
Category	Control Unit
Language	English