Arris C4 - Configure Interface Gigabitethernet Encapsulation Dot1 Q Priority

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1731
configure interface gigabitethernet * encapsulation dot1q * priority
Purpose
Defines the 802.1p priority bits on the egress.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] encapsulation dot1q <int> priority [<int>]
[iptos]
configure interface gigabitethernet <slot>/<port>[.<0-254>] encapsulation dot1q <int> priority [<int>]
[iptos] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<int>
Q-tag as defined by IEEE 802.1Q
[<int>]
Fixed priority value
[iptos]
Maps IP TOS precedence to priority bits