Arris C4 - Configure Interface Gigabitethernet Isis Protocol Shutdown

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1827
configure interface gigabitethernet * isis protocol shutdown
Purpose
Disables the administrative state of IS-IS on the specified interface
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis protocol shutdown
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis protocol shutdown no
Supplemental
Information
To enable the administrative state of IS-IS on the specified interface, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]