Arris C4 - Configure Interface Gigabitethernet Ip Rip Default-Metric

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1777
configure interface gigabitethernet * ip rip default-metric
Purpose
Configures the RIP metric for the default route.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip rip default-metric <metric>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip rip default-metric [<metric>] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<metric>
Default metric is 0. Valid range is 0 to 15. If the default route metric is set to 0, the default route is not advertised.