Arris C4 - Configure Cable Host Authorization Cpe

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1320
configure cable host authorization * cpe
Purpose
Turns on or off the CPE Host Authorization.
Default Access Level
15
Command Syntax
configure cable host authorization <mac> cpe <mac> <ip addr>
Supplemental
Information
N/A
Parameters
<mac>
Subscriber’s MAC address. Valid forms for a MAC address are:
xx.xx.xx.xx.xx.xx
xxxx.xxxx.xxxx
xxxxxxxxxxxx
<ip addr>
IP address to map to the CM/CPE MAC pair