Arris C4 - Show Cable Modem State

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2713
show cable modem state
Purpose
Filters and displays cable modems by specified state.
Default Access Level
1
Command Syntax
show cable modem state <state> cable-mac
Supplemental Information
N/A
Parameters
<state>
offline
Cable modem is not currently active
ranging
Initial ranging in progress
rngaborted
Ranging has failed
ranged
Ranging has been completed
dhcpv4done
IP address has been assigned
registered
CM registration has been completed
denied
Service is being denied
operational
Active cable modem
regbpiinit
CMTS is in the process of completing BPI initialization
eaestart
CMTS has received an Auth Info message for EAE from the CM
dhcpv4start
CMTS has received a DHCPv4 discover message from the CM
dhcpv6start
CMTS has received a DHCPv6 solicit message from the CM
dhcpv6done
CMTS has sent a DHCPv6 reply message to the CM