Arris C4 - Configure Router Bgp Redistribute Isis

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2424
configure router bgp * redistribute isis
Purpose
Configures redistribution routes from Intermediate System-to-Intermediate System (IS-IS) routing processes into a Border Gateway
Protocol (BGP) autonomous system.
Default Access Level
15
Command Syntax
configure router bgp [<int>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>]
[route-map <int>]
configure router bgp [<int>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>]
[route-map <int>] no
Supplemental
Information
Route maps are referenced by name.
To remove the route redistribution, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
[<level1 | level-1-2
| level-2>]
Enumerates the type of IS-IS routes to redistribute into BGP.
[metric <int>]
Metric associated with redistributed routes
[route-map <int>]
Route-map used to modify BGP attributes of redistributed routes