Arris C4 - Configure Snmp-Server Engineid Remote

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2543
configure snmp-server engineid remote
Purpose
Configures the engineId of the remote engine.
Default Access Level
15
Command Syntax
configure snmp-server engineid remote <a.b.c.d> <word> [udp-port <int>]
configure snmp-server engineid remote <a.b.c.d> [<word>] [udp-port <int>] no
Supplemental
Information
To remove the engineId of a remote engine, use the no option.
Parameters
<a.b.c.d>
IP address of remote engine
<word>
Remote engine ID string (in hexadecimal format, 0-9, A-F)
[udp-port <int>]
UDP port number