Arris C4 - Configure Interface Cable-Mac;Cable Invited-Ranging-Attempts

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1533
configure interface cable-mac * cable invited-ranging-attempts
Purpose
Sets the maximum number of attempts by a cable modem to range to an upstream channel without being heard by the C4 CMTS
before giving up on that upstream channel.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable downstream invited-ranging-attempts <number of attempts>
configure interface cable-mac <mac> cable downstream invited-ranging-attempts [<number of attempts>] no
Supplemental
Information
To reset the default value, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<number of
attempts>
Valid range is 0 to 1024. Zero (0) means that the system would attempt to range forever.
Default is set at 16.