Arris C4 - Configure Router Ospf Network Area

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2494
configure router ospf * network * area
Purpose
Defines the interfaces on which OSPF runs and the area ID for those interfaces.
Default Access Level
15
Command Syntax
configure router ospf [vrf <name>] network <ip-address> <inverse mask> area <area-id>
configure router ospf [vrf <name>] network <ip-address> <inverse mask> area [<area-id>] no
Supplemental
Information
To delete the interfaces on which OSPF runs and remove the area ID for those interfaces, use the no option.
Parameters
[vrf <name>]
Name of the assigned VRF.
<ip-address>
IP address
<inverse mask>
Inverse mask specifying OSPF wildcard bits
<area-id>
Area that is to be associated with the OSPF address range specified as an IP address. Specified area id either as an IP address or an
unsigned long.