Chapter 45: CLI Overview
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1109
C4(config-cable)# ?
authorization-module - Modify authorization module values
cable - Downstream and upstream parameter configuration
cls - Clear the terminal screen
description - Interface specific description
echo - Turn on echo/Print text to terminal
end - Exit all submenus
exit - Exit intermediate mode
help - Show command help
history - Display the command history
igmp - Static join a multicast group on this port
ip - IP address of Cable Interface
logout - Log off this system
proxy-arp - Enable proxy ARP for this cable interface
quit - Exit intermediate mode
restore - Restore the CAM interface
restricted-proxy-arp - Restrict proxy ARP to CPEs behind different CMs
show - Show running system information
shutdown - Shutdown both the MAC and Downstream for the interface
spare-group - Configure a CAM sparing group
subscriber - Commands for subscriber management
voice-limits - Set voice data limits
<cr>
Use of the Carriage Return <CR>
The <CR> (carriage return symbol) at the end of a command help output indicates that you have the option to press Enter
to complete the command and that the arguments and keywords in the list preceding the <CR> symbol are optional. If
there is a mandatory parameter that needs to be entered, no <CR> will appear.
Error Indicator
The CLI provides error isolation in the form of an error indicator, a caret symbol (^). The ^ symbol appears at the point in
the command string where the user has entered incorrect or unrecognized command syntax. For example, the ^ symbol in
the following output shows the point at which the error occurred in the command (e.g. clock is misspelled):
configure clokc
^
Error: Invalid parameter
To Next Page
Loading...
